Mobile Asphalt Plant
Chassis-mounted, pre-wired drum mix plant that tows between sites and starts without civil foundations.
Explore mobile plants →Asphalt Drum Mix Plant – DM Series, 40 to 120 TPH
A continuous drum mix plant that dries, heats and coats aggregate in one thermo drum. Three models, stationary or mobile, built in Ahmedabad and exported worldwide.
What the Vinayak drum mix plant does
The asphalt drum mix plant is the workhorse of bituminous road building. Graded aggregate from four cold bins is weighed on a moving belt, screened and slung into an inclined thermo drum. A high-pressure burner dries and heats it, then bitumen and mineral filler are added further down the same drum. The coated material leaves as homogeneous hot mix, ready for the load-out conveyor and tipper.
Because mixing happens continuously, a drum mix plant has fewer components than a batch plant. There is no hot elevator, hot screen or weigh hopper to maintain, which keeps both the purchase price and running costs down. That is why most contractors in India and across Africa choose a drum plant for national highway, state highway and urban road work.
Asphalt drum mix plant models
DM-45Rated 40 – 60 TPH
DM-50Rated 60 – 90 TPH
DM-60Rated 90 – 120 TPH
Output depends on aggregate moisture, grading and mix design. Capacities over 150 TPH are offered on request.
Salient features
Stationary drum mix plant
- Modern drum mix technology for proper drying and homogeneous mixing
- Uniform asphalt coating with controlled bitumen use
- Continuous electronic belt weighing with load cell
- SCADA/PLC control panel with online print-out
- Schneider make HMI with touch screen
- Low fuel consumption and easy maintenance
- Designed for domestic and international markets
Mobile drum mix plant
- Modular units sized for road transport
- Completely pre-wired, so you get set and go
- No civil works needed at site
- Chassis with axle assembly, front and rear brakes, leaf springs, air tank, landing gear, king pin, rims and tyres
Read more on the dedicated mobile asphalt plant page.
Key specifications
| Item | DM-45 | DM-50 | DM-60 |
|---|---|---|---|
| Rated output | 40 – 60 TPH | 60 – 90 TPH | 90 – 120 TPH |
| Cold bins / storage | 4 / 100 t | 4 / 120 t | 4 / 150 t |
| Dryer drum Ø × L | 1200 × 6250 mm | 1500 × 6750 mm | 1800 × 7000 mm |
| Burner (diesel) | 350 LPH | 550 LPH | 750 LPH |
| Bitumen tank | 15 t | 20 t | 25 t × 2 |
| Dust collector cones | 10 | 15 | 21 |
The complete component data (motors, belts, screens, tanks, load-out and filler unit) is on the asphalt drum mix plant technical specification page. Specifications may change with product upgrades.
Optional pollution control
Choose a wet dust collector (extreme turbulence venturi, below 150 mg/m³) or a reverse-air bag house filter (below 50 mg/m³).
Where drum mix plants are used
Drum mix plants produce the bituminous layers for highways, city roads, rural roads, airports, ports and industrial yards (see applications). If your specification calls for strict per-batch grading control or frequent mix changes, compare it with an asphalt batch mix plant on our hot mix plant comparison.
Exporters & suppliers of asphalt drum mixing plants
As asphalt drum mix plant exporters in India, Vinayak ships plants packed for container or flat-rack transport, with installation guidance and site support. See the export page for countries supplied and how dispatch works.
FAQ
Asphalt drum mix plant FAQs
What is the difference between DM-45, DM-50 and DM-60?
The models differ in output and drum size. DM-45 covers about 40–60 TPH with a 1200 mm dryer, DM-50 about 60–90 TPH with a 1500 mm dryer, and DM-60 about 90–120 TPH with an 1800 mm dryer. Burner, motor and tank sizes scale with the model.
Can the drum mix plant be supplied in mobile form?
Yes. Any model can be built on wheeled chassis with axles, wheel hubs, tow bar and pin, and pre-wired cables, sockets and junction boxes to link the units.
Which pollution control options are available?
A multi-clone primary dust collector is standard. As a secondary unit you can choose a wet dust collector (extreme turbulence venturi, below 150 mg/m³) or a reverse-air bag house filter (below 50 mg/m³).
How much land does the plant need?
Open land of roughly 35 m × 35 m to 40 m × 40 m is recommended, depending on model. The team will confirm the layout for your site.
What generator size is recommended?
Recommended generator sets are in the 100–125 KVA range depending on model. Confirm the exact rating for your selected plant with the quotation.
Do you supply plants above 120 TPH?
Yes, capacities over 150 TPH can be offered on request.
Related asphalt plants
Technical Specification
Full component-by-component data for DM-45, DM-50 and DM-60 drum mix plants.
See full specifications →Types of Asphalt Drum Mix Plant
Stationary, mobile and portable plants, by capacity and by emission control.
Compare plant types →Planning a road project? Get a plant sized to it.
Share your required output, mix type and site location. The Vinayak team will recommend a model and send a quotation.
